Make Webgame Tempalte

construction of a bolt pistol, Part 1: Design & Cutting

First, for those who do not know what a bolt pistol is a link
The weapon should be suitable for use on LARPs.

Planning:
plans to paint the Nerf gun metal and provided with a golden mouth, and 2 golden Aquila . The weapon
should fit to a (superior), Imperial Commissioner .

Disassembly

be decomposed to decent painting, the Nerf-gun completely.
the weapon after this I also get back together, I took pictures of various steps that you find here . I

the Nerf gun had broken into the following steps: Loosen the bolts on

1. clamping mechanism (3 pieces) and remove the two shells. This can lead to a snapping noise, as the clamping mechanism connected with a spring in the gun is.
2. only then can the bolts of the case be resolved, since a screw is located under the clamping mechanism. Thereafter, the housing can be removed easily.
   The side with the screws should be paid on top.
3. then I've removed the ammunition drum. This is quite easy, as the drum is simply connected.
4. Then just take out the pressure chamber and the spring
An adjacent
5. Now I have solved the spring of the clamping mechanism.
6. then I have removed the trigger (watch out for the spring, otherwise it flies across the room.
7. Then I have the screws of the Rotary mechanism solved (carefully, the whole is slightly under tension, as under the mechanism is a button with a spring is located.
8. Finally I removed all the loose parts (knob, spring, river mouth).

The whole structure is not particularly complicated, so I'm optimistic that the whole relatively easy to assemble again leaves.